- modding thread -

[pontusneo]

Ya a computer modding thread ... woohoo :D
come on post your modds.

[pontusneo]

Ok ill start than :)

CPU: P4 2.6 @ 3.4Mhz HT-800Mhz (3.2Mhz during summer :rolleyes: )
mb: Abit IC7 - G
gfx: Sapphire 9800xt 256mb
HDD 1: Seagate Barracuda 60Gb 7200rpm
HDD 2: IBM 40Gb 7200rpm
Ram: 2x 512Mb DDR corsair Pro XMS
Ram: 1x 256mb DDR corsairXMS cas2
PSU: Power Supply 350W
DVD: pioneer Slot-in DVD
CDrw: TDK cykloon
size: 60x20x45 cm (HxBxD)

chassi: modded Aopen HX08
4x 80mm enermax fläcktar
1x 92mm enermax fläckt
2x 30cm UV-cffl
1x 10cm UV-cffl
1x 30cm blue-cffl

http://galleri.sweclockers.com/chassi_img/465_1.jpg http://galleri.sweclockers.com/chassi_img/465_4.jpg
http://galleri.sweclockers.com/chassi_img/465_2.jpg http://galleri.sweclockers.com/chassi_img/465_3.jpg

[Vasquez]

Here's my current system:

AMD Athlon64 3500+
ABIT AV8 3rd Eye
nVIDIA 6600GT
1024mb PC3200 DDR RAM
2x 120gb Maxtor hard disk
2x 80mm fan
120mm fan
500w Blue Storm PSU
black floppy drive
black DVD drive
Green Chieftec Dragon case

Here's what I'm planning to mod my case with:

1 x Green Chieftec clear side panel

3 x blue Akasa 80mm LED fans for the front and back fan slots

3 x blue Sunbeam 80mm LED fan grills CS for the above fans

2 x blue Akasa 120mm LED fan, one for the side panel and one for my CPU

1 x 120mm fan guard for the side fan above

1x ThermalRight XP-120 CPU cooler

2 x blue Akasa LED SATA cables

1 x blue Akasa floppy cable

2 x blue Akasa drive coolers for my hard disks

1 x blue Vantec UV/UV sensetive PCI cooler that will go under my graphics card

1 x AMD case badge to go on the front door

1 x packet of Vantec UV sensetive slot protectors for empty PCI slots

2 x blue Sunbeam LED bubble lights for the top of the inside of my case

Might also get another LED fan to put in my PSU and I shall soon be upgrading my graphics card and mobo.

[Hovis]

Pontus that PC looks the balls. I want one. :cool:

Mine is a plain black Savrow SR71 case, sleek, silent, dusty as fuck but nevermind.

I keep intending to do a full remodding job but since my monitor is a giant ugly white lump it seems pointless. :(

[knaggsy]

i saw that pic and i thought "i want that one"..

btu theni realsied the place i put my case only has room for a standed hight case.. i can only go wider.. i like my case thou :)

[DrQuinn2]

All very nice, but you guys must have money to burn (or rich parents)
I would spend my money on faster or better quality parts rather than flashy light s and bells.
Must be the same generation that spends thousands of pounds on body kits and
car stereo equipment that's worth more than the Citroen Saxo it's fitted to.
Oh well, harmless fun I suppose :o)

[justinalot]

Yeah us oldies have been there and done it. We know where to spend our dosh :D

But I do like Ponts case and I know it does not cost that much more than your standard crappy looking ones.

Anything is better than biege

[Hovis]

A good case is about fifty quid. Mods cost very little. You guys have no excuse!

[Oselly]

im too lazy, thats a good enough of an excuse for me

[One Armed Scissor]

when i get a new case im gonna bother modding it, or just spray it with fake snow or something.

[JojoTheSlayer]

http://www.descom.be/images/behuizingen/chieftec_bx_03b_b_b.jpg

I have this tower. Modded whit two 2x2cm stickers on the front.
One beeing AMD64 and other beeing a ASUS sticker. :P